test equipment

The stirrer shall incorporate a biased-off switch that is recessed or guarded to prevent accidental operation. It conforms to the IEC60335-2-14 requirement. Appliance is checked by applying a cylindrical rod whose diameter is 40mm and which has a hemispherical end to touch the switch with a force not exceed 5N.The appliance shall not operated.

This test plug conforms to IEC60065 Figure 8 standard requirement. It is used to test the antenna coaxial socket which is installed on the device and equipped with parts or components which isolate the hazardous live parts and accessible parts. Its structure should be able to withstand the expected mechanical stress that might encounter during the use process. It is made entirely of stainless steel. All parts are machined with precision.

The Test Finger Probe B is a precision test probe made according to Figure 2 (Fig. 2) of the IEC61032 (Test probe B) and is used to simulate a human finger. It is also used by the standards of CSA, IRAM, UL and in most of the rules involved in the verification of accessibility to live parts.

HT - I03 Test Rod Probe is specially designed for testing the protection performance of electrical equipment. It is suitable for testing the protection structure that prevents human contact with dangerous parts. It can also be used to test the protection that prevents hand-held tools from touching.

Food waste probe 31 confirms to IEC61032 figure 14 standard. It is used for checking food waste disposal units of milling system of hazardous mechanical parts whether is touched or not.Rod: Ø25mm, 80mm long, interchangeable metal or Delrin probe. It conforms to the IEC61032 Test probe 31.The handle is made of nylon,tip is made of stainless steel.

HT-U08 Test Rod Probe is designed strictly in accordance with UL1278 Fig 10.4 standard and is specially designed for safety protection detection of heating elements and their components. Its unique nylon handle + hard steel probe combination takes into account both operating comfort and detection reliability. It is a powerful assistant in the field of electrical safety detection and provides accurate protection for the safety protection of heating equipment.

The UL accessibility probe is also called UL articulated probe or jointed test finger probe. It conforms to many standard requirement of UL474 Fig 5.1, UL507 Fig 9.2(PA100A), UL982 Fig 7.1, UL1017 Fig 2, UL1062 Fig1.2, UL1278Fig 8.3, UL1310 Fig 16.2, UL6500 Fig14, UL60065 Fig14 and UL60950 Fig NAF.1.

HT-U16 Test Finger Probe is designed in strict accordance with UL507 Fig 8.2 (S2140A) standard. Its innovative nylon handle + stainless steel probe combination takes into account both operational comfort and detection accuracy, providing reliable protection for product safety.

It conforms to the standard of UL499 Fig 6.4 and UL982-2006 Fig 58.5(PA190). It is applicable for the electrical equipment. The handle is made of Nylon, and the tip is stainless steel.  

HT-U09 Test Finger Probe is manufactured in strict accordance with the international standard UL507 Fig 8.2 (S2140A) and is suitable for safety testing of stationary fans and impellers and other moving parts of fans that are intended to be permanently electrically connected.

Endüstriyel elektrikli ekipmanların geliştirilmesi ve kalite kontrolünde, malzemelerin mekanik özelliklerini anlamak esastır. Stres-gerinim test cihazı, bu özelliklerin tam olarak ölçülmesinde önemli bir rol oynar.

Hanehalkı Elektrikli Kettle Plug-In Life test cihazı, ev elektrikli su ısıtıcısı fişi ile soket arasındaki sık eklenti ve çekme işlemlerini simüle etmek için özel olarak kullanılır. Çok sayıda tekrarlayan test yoluyla, uzun süreli kullanım sırasında elektrikli su ısıtıcısının eklenti kısmının performansını doğru bir şekilde tespit edebilir ve dayanıklılığını ve güvenilirliğini değerlendirebilir.