probe test

This test sphere probe confirms to IEC61032 figure 5 test probe 1,IEC60335,IEC60950, IEC60598,UL507 standards. It is intended to verify the degree of protection of enclosures against ingress of solid foreign objects having a diameter of 50mm or greater. It is also regarded as the steel ball for dropping impact test. It can be equipped with a lifting ring, and used for pendulum bob test after hanging with a rope. Steel balls with other diameters can be customized.

HT-U09 fan blade probe strictly complies with UL507 Figure 8.2 (S2140A) standard and is specially designed for protection testing of fan impellers and internal moving parts. It is carefully crafted by the source manufacturer to ensure fan safety.

This pin is intended to verify the protection against access to hazardous live parts in class 0 equipment and class II equipment. It conforms to IEC61032 figure 9 Test probe13, IEC60950 figure 2B, IEC60335 and IEC60065 standard requirements. Customizable: It can be used for enclosure protection test when open threaded hole of M6 at the end of the handle (connected with pull and push dynamometer).

These two test probe separately confirm to the IEC60884-1 figure 9 and figure 10.The HT-I20 test probe with 20N force is used to test whether the live parts inside can be touched. The HT-I21 test probe with 1N force is for testing whether the live parts with the protection of socket can be touched.

HT-I26 scratch probe is specially designed for the easily accessible component surfaces of the protected cooling system in household appliances, including the scratch test of the easily accessible surface in close contact with the protected cooling system, such as the scratch resistance test of refrigerator doors. It strictly complies with GB4706.13 Figure 102, IEC60335-2-24 Figure 102 and other standards, and the quality is guaranteed by the source manufacturer.

The Cone Probe meets UL1278 Fig 10.1 standards, featuring a stainless - steel probe and nylon handle. Designed to test heating elements and components, it ensures protection against contact with people and flammable materials. Engineered to the standard’s specifications, it delivers reliable results for safety compliance evaluations.

This probe conforms to the IEC60335-2-11 figure 104 and IEC60335-2-6-2002 figure 104 standard requirements. It is mainly used to measure the temperature rise on the front surface of the easily accessible parts of drum-type dryer, upright electric cooker, cooking bench and oven.

This test plug conforms to IEC60065 Figure 8 standard requirement. It is used to test the antenna coaxial socket which is installed on the device and equipped with parts or components which isolate the hazardous live parts and accessible parts. Its structure should be able to withstand the expected mechanical stress that might encounter during the use process. It is made entirely of stainless steel. All parts are machined with precision.

The Test Finger Probe B is a precision test probe made according to Figure 2 (Fig. 2) of the IEC61032 (Test probe B) and is used to simulate a human finger. It is also used by the standards of CSA, IRAM, UL and in most of the rules involved in the verification of accessibility to live parts.

Food waste probe 31 confirms to IEC61032 figure 14 standard. It is used for checking food waste disposal units of milling system of hazardous mechanical parts whether is touched or not.Rod: Ø25mm, 80mm long, interchangeable metal or Delrin probe. It conforms to the IEC61032 Test probe 31.The handle is made of nylon,tip is made of stainless steel.

Test Finger Probe is a professional testing tool that strictly complies with authoritative standards such as GB4706.1 Figure 7, IEC60335 Figure 7, etc. It is mainly used to test whether the fixing method of non-detachable parts that prevent contact with live parts, waterproof or prevent contact with moving parts can withstand the mechanical stress in normal use.

HT-U08 Test Rod Probe is designed strictly in accordance with UL1278 Fig 10.4 standard and is specially designed for safety protection detection of heating elements and their components. Its unique nylon handle + hard steel probe combination takes into account both operating comfort and detection reliability. It is a powerful assistant in the field of electrical safety detection and provides accurate protection for the safety protection of heating equipment.